Click For More Details

 ! UPGRADE SPECIAL !
Includes FREE Shipping
     To US Locations.

Quick Overview:

• Optimize Accuracy On Any 4-Cycle Engine
• Direct-Click™ Interface Makes Point-and-Click
  Part Swapping A Snap!
• ProTools™ Features From Dynomation6!
• Test Any Stock Or Racing Engine
• Evaluate Cylinder Heads, Custom Port Flow, Cams, Intake Manifolds, Headers, Mufflers, More!
• Diesel Modeling with Compression Ratios Up To 30:1
• Carburetors or Injection, Custom Fuels, Turbos, Superchargers, Intercoolers, Test Any RPM range!
• View Graphs of Pressures, Velocities, Mass Flow!
• Run Automatic Iterator™ Tests to Find Best Combinations!
• Run Back-to-Back Tests, Comparison Graphs!

• Imports all previous-version DynoSim files.

• Built-In Calculators Make Flow, Cam Timing, Compression-Ratio and Other Computations Easy!
• Accuracy: +/- 5% Of True Dyno Results
   

FREE Upgrade Special!
DynoSim6 is supplied with the
NEW COMP 3500+ Lobe-Profile Library CD
{$69.95 value, Free With Upgrade).

   DynoSim6™ With ProTools™ is a highly accurate engine-dyno simulation, built from the ground up for the IC engine enthusiast. DynoSim6 is so easy to use that you’ll be building horsepower with this simulation in just minutes. Assemble and evaluate any engine you can imagine. Click on and change any component, select from pop-up menus or enter your own custom specs. DynoSim6 instantly displays power and torque, fuel flow, airflow, frictional losses, and much more!

   UPGRADE SPECIAL FOR DYNOSIM USERS: :For a limited time (sale ends August 9th, 2019) you can upgrade to DynoSim6 for only $49.95. You'll receive our new Lobe-Profile Library CD free with your order ($49.95 value). DynoSim6 is the culmination of 10 years of development by Motion Software, Inc. It incorporates the latest in wave-action simulation technology that accurately models any 4-stroke IC engine, including Diesel engines!
  Version 6 includes hundreds of new and updated features, including improved turbo and supercharger modeling, more accurate nitrous injection, additional fuel choices, more exhaust system/header choices, including a new exhaust pipe dimension calculator/optimizer! You can load and test lobe-profile cam files along with 10-point files supported in the previous version. A new sim-log (viewable after every simulation run) provides advice on how to improve the simulation and your engine design.

   DynoSim6 is, simply, the most simulation for the money, and it’s fun to use, too!  We Guarantee it!

DynoSim6 Simulation Package Includes:

• Full DynoSim6 W/ProTools™ Four-Stroke Engine Simulation

• QuickStart Guide (Printed fold-out with Registration Number)

• 300+ Page Color User Guide Included On CD

• Includes FREE 10-point cam library with 6000 10-Point Camfiles, and a 3500+ Lobe Profile File Library CD (A Hot-Rod Industry FIRST)!

• All Current and Future Version-6 Updates FREE!

• Fully Compatible With Windows Vista and Windows7, 8 and 10 (32- and 64-bit).

DynoSim6 is supplied with the
NEW 3500+ Lobe-Profile Library CD.

Upgrade Special Ends 8/9/19. Order Today!

New DynoSim6 With ProTools™

Full ProTools™ Package
Special Only $149.95
Free Shipping To U.S. Locations

Upgrade Special For DynoSim Users
For DynoSim4/5 or Dyno2000 Simulation Users

Upgrade To
DynoSim6  With/ProTools™
Full Simulation Package
Sale Ends December 31st
Must be a registered user of previous engine simulation.

Special Only $69.95
         (Regularly $149.95)

Free shipping for US locations
($19.95 outside the US).