All Motion Software Includes A Full Money-Back Guarantee Of Your Satisfaction!

The new CamDisk3™ from Motion Software contains over 3500 cam-data files that you can instantly test in the Dyno2003 using the new CamManager™, a powerful cam-analysis tools built into the Dyno2003. CamDisk3™ camfiles contain extended data that produce more accurate simulations than ever before (see The Real Power Of CamDisk3™, below). You'll find mileage, towing, street performance, drag racing, road racing, and marine camshafts on this comprehensive disk. Save hours of time searching through cam manufacturer's catalogs. Expand the camfile library for the Dyno2003 and find the right cam for your next engine project in seconds.

Product Overview: Previous CamDisk owners will appreciate the new features of CamDisk3™. All camfiles included on this disk are automatically installed in the CamFiles (.CAM) directory located on your computer (created when the Dyno2003 is installed). CamFiles on CamDisk3™ combine with the 800 camfiles supplied with the Dyno2003 to build an extensive camfile library of approximately 4000 camfiles! Locating these files on your system results in much faster access times, but those are only some of the features of our new CamDisk3™.

The Real Power Of CamDisk3™: The Dyno2003 incorporates new modeling algorithms that can calculate a Lifter Acceleration Rate for test cams by performing an analysis of valve-timing specifications. In order to complete this lobe-profile analysis, the Dyno2003 needs access to all ten cam-timing data points (seat-to-seat and 0.050-inch opening and closing points plus peak valve lift for both the intake and exhaust lobes). If all ten points are available, Lifter Acceleration will be calculated and displayed in the CamManager™, a powerful new cam-analysis tool built into the Dyno2003. All camfiles provided with the Dyno2003 and the 3500+ additional files included on CamDisk3™ have complete cam specifications that allow the Dyno2003 to automatically calculate Lifter Acceleration. When Lifter Acceleration is known, the Dyno2003 can more accurately predict power and torque for any test engine.

Availability: The CamDisk3™ (version 3.05) for the Dyno2003 is available now from Motion Software. See our Order Form, for order information and special Web discount pricing and upgrade policies.

Requirements: The Dyno2003 (version 4.05 or later) must be installed before CamDisk3™ can be installed. All camfiles automatically install in the CamFiles (.CAM) Dyno2003 directory and are accessible from within the CamManager™ built into the Dyno2003.

What  Can I Do With CamDisk3™:
  • Increase CamFile Library To 4000 CamFiles!
  • Improve CamFile Search Times By 100's
  • Add CamFiles That Support Automatic Lobe Acceleration Calculations
  • Improves Accuracy Of Simulations Using CamFiles
  • CamManager™ Displays All Timing Data, Recommended Application Info, Cam Lobe Acceleration, Cam Manufacturer, And More.
  • Search For Any Cam By Keyword, Timing Value, Description, Application, Engine Family, etc.

CamFiles Included On CamDisk3™:

Engine Family Cam File Reference Tables Number Of Cam
Files On CamDisk3
American Motors AMC Cam Files 99 Cam Files
Buick Buick Cam Files 137 Cam Files
Cadillac Cadillac Cam Files 17 Cam Files
Chevy 4 & 6 Cylinder Chevy 4 & 6 Cam Files 205 Cam Files
Chevy BigBlock Chevy BigBlock Cam Files 494 Cam Files
Chevy SmallBlock Chevy SmallBlock Cam Files 739 Cam Files
Chrysler 6 & V8 Chrysler Cam Files 407 Cam Files
Corvair Corvair Cam Files 5 Cam Files
Datsun-Nissan Datsun-Nissan Cam Files 13Cam Files
Ford 4 & 6 Cylinder Ford 4 & 6 Cam Files 142 Cam Files
Ford V8 Engines Ford V8 Cam Files 996 Cam Files
Ford Flathead Flathead Cam Files 5 Cam Files
Harley Davidson Harley Davidson Cam Files 24 Cam Files
Harvester Harvester Cam Files 3 Cam Files
Holden Holden Cam Files 33 Cam Files
MG MG Cam Files 11 Cam Files
Oldsmobile Olds Cam Files 103 Cam Files
Pontiac Pontiac Cam Files 173 Cam Files
Rover Rover Cam Files 12 Cam Files
Toyota Toyota Cam Files 32 Cam Files
Volkswagen VW Cam Files 23 Cam Files
  3673 Total Cam Files On Disk

Special Web Pricing & Package Deals Available Now!

What's New In CamDisk3:

  • Automatically Installs All CamFiles In Dyno2003 CamFile directory
     
  • Expands Dyno2003 CamFile Library To 4000 CamFiles.
     
  • Improves CamFile Search Times By Factor Of 100!
     
  • Supports New Lobe Acceleration Calculations Within Dyno2003
     
  • Includes Extended Cam Data, Including Application Data, Description, Engine Family, And More. Search For Any Timing Value Or Keyword.

System Requirements:

  • Any IBM® compatible PC system capable of running Windows95/98/ /Me/ NT/2000/XP
     
  • Basic VGA video capability (640 x 480), however, 800 x 600, 1024 x 768 or higher resolution recommended
     
  • CD-ROM disk drive
     
  • Mouse
  Site Navigation: 

Home           About           Privacy           Guarantee           Site Map

Products            Order Products On Line           Support            Register On Line 

    FeedBack           Special Pricing           Links
Send questions or comments about this web site to latherton@motionsoftware.com. Copyright (c) 1997/2016 Motion Software, Inc. All Rights Reserved. No part of this document may be reproduced without the explicit written permission of Motion Software, Inc.